Axle
Bracket Assembly
Install
Upper/ Lower Brackets
Upper
Axle Bracket
Hardware:
1/2-13 x 1" tapered Allen bolt x 6
1/2-13 x 1.5" bolt x 4
1/2" flat washer x 14
1/2-13 lock nut x 8
3/8-16 x 1" bolt x 8
3/8" flat washer x 8
9/16-12 x 4.5" bolt x 2
9/16" flat washer x 4
9/16-12 lock nut x 2
3/4-10 x 3" bolt x 4
3/4" flat washer x 8
3/4-10 lock nut x 4
Grease Zerk fitting x 2
Reducer sleeve x 2
Poly bushing x 4
(This hardware is used for axle mounts & arms)
1/2-13 x 1" tapered Allen bolt x 6
1/2-13 x 1.5" bolt x 4
1/2" flat washer x 14
1/2-13 lock nut x 8
3/8-16 x 1" bolt x 8
3/8" flat washer x 8
9/16-12 x 4.5" bolt x 2
9/16" flat washer x 4
9/16-12 lock nut x 2
3/4-10 x 3" bolt x 4
3/4" flat washer x 8
3/4-10 lock nut x 4
Grease Zerk fitting x 2
Reducer sleeve x 2
Poly bushing x 4
(This hardware is used for axle mounts & arms)
Locate brackets
shown in picture and loosely assemble as shown in pictures-
Lower mount is installed with flange plate toward rear of vehicle.
Refer to next step for position of upper axle mount.
Lower mount is installed with flange plate toward rear of vehicle.
Refer to next step for position of upper axle mount.
Upper pinion tube mount faces
front of vehicle.
NOTE: Washers are only used on the top of these mounts!
Lower
Arm Mount
With the
axle brackets loosely mounted, ensure that brake lines are clear of any
moving parts and tighten all hardware.
Once axle mounts are tight, move on to installing the lower arms.
Once axle mounts are tight, move on to installing the lower arms.